Vantage

Approved MIL-PRF-680 Type I Cleaner. Very low odor, fast drying cleaner. Replaces acetone, isopropyl alcohol (IPA), mineral spirits, PD-680 solvents, and other hazardous solvent cleaners. Download Info.

Approved MIL-PRF-680 Type II Cleaner. Very low odor, moderate drying cleaner with a flash point above 140oF/60oC. Replaces acetone, isopropyl alcohol (IPA), mineral spirits, Stoddard solvent, PD-680 solvents, and other hazardous solvent cleaners. This halogen-free cleaner is suitable for use in solvent cleaning stations as well as sealed cleaning systems from Amsonic, Durr, IFP, Pero. Formulated for complete extraction and reclamation. Download Info. Download Info.

Solvent based manual and immersion cleaner formulated to quickly remove tape and flux residues from electronic assemblies as well as uncured surface mount adhesives and raw solder pastes from stencils and misprinted circuits. This powerful cleaner eliminates white residue headaches typically caused by inefficient flux removal with isopropyl alcohol. Suitable for use in cleaning equipment designed for isopropyl alcoho. Download Info. Download Info.

Approved MIL-PRF-680 Type III Cleaner. Safe, high flash point (205oF/96oC) cleaner removes heavy greases and high melt point soils. May be operated at elevated temperatures. Download Info

Approved MIL-PRF-680 Type IV Cleaner. Slightly stronger than AXAREL 2000 with a mild citrus odor. Download Info

Formulated with a broad range of solvency, it is a direct replacement acetone, IPA, MEK, toluene and other low flash point, flammable materials. Fast drying and low surface residue. Download Info – Download Info.

Hydrocarbon based product, offering low odor, minimal residues, and broad range of solvency. Download Info.

Designed for use as a manual cleaner, offering broad-based solvency, low toxicity and low odor. Download Info.

Fast drying, widely approved cleaner designed to replace acetone, isopropyl alcohol (IPA), methyl ethyl ketone (MEK), methyl propyl ketone (MPK), mineral spirits, and other hazardous solvent cleaners. Removes a wide range of difficult soils including adhesives, corrosion inhibitors, greases, hydraulic fluids, sealants, silicones and waxes. Also available as pre-saturated wipes. Download TDS.

BIOACT 105 in pre-saturated wipes that are safe, convenient and economical. Replaces acetone, isopropyl alcohol (IPA), methyl ethyl ketone (MEK), methyl propyl ketone (MPK), mineral spirits, and other hazardous solvent cleaners. 6 tubs per case. 70 wipes per tub. Download TDS

High temperature masking wax designed for selective plating. Easily removed with BIOACT 280 Wax Remover series. Melt point range 180-190oF/82-88oC. Download Info.

Highly refined plating wax. Easily removed with BIOACT 280 Wax Remover series. Melt point range 1680-180oF/76-82oC. Download Info.

A solvent degreaser formulated to meet the requirements P-D-680B specification in accordance with A-A-59601E Type II. Download Info. Download TDS

An aqueous cleaner concentrate for turbine engine gas path cleaning for off-line and on-line engine cleaning. When used as directed, it is effective in cleaning compressor blades, stators, air passages, etc in turbine engines. Download Info

A concentrated liquid compound designed to meet the environmental and economical needs for cleaning and degreasing industrial parts and equipment, through recirculating high-pressure spray cabinets. Download TDS.

A liquid non-abrasive spot cleaner for smudges, boot marks and other embedded soils Download TDS.

A low abrasive spot cleaner for aircraft thrust, smoke trail and rocket blast areas from painted and unpainted aircraft exterior surfaces. Download TDS.

A liquid cleaner-polish designed for use on painted and unpainted aircraft exterior surfaces. Download Info

A water-based ready-to-use exterior aircraft cleaner to remove dirt, grime, oils, hydraulic fluid and other soils. Download Info.

A water-based ready-to-use exterior aircraft cleaner to remove dirt, grime, oils, hydraulic fluid and other soils. Download Info.

A special liquid deodorant for aircraft cabin interiors. Download TDS.

An aqueous cleaner concentrate for turbine engine gas path cleaning for off-line and on-line engine cleaning. When used as directed, it is effective in cleaning compressor blades, stators, air passages, etc in turbine engines. Download Info

An aqueous cleaner concentrate for turbine engine gas path cleaning for off-line and on-line engine cleaning. When used as directed, it is effective in cleaning compressor blades, stators, air passages, etc in turbine engines. Download Info

An aqueous cleaner concentrate for turbine engine gas path cleaning for off-line and on-line engine cleaning. When used as directed, it is effective in cleaning compressor blades, stators, air passages, etc in turbine engines. Download Info.

A viscous liuid compound used in the removal high and low VOC polysulfide primers, sealants and other coatings for metallic aircraft surfaces. Download Info.

A viscous liuid compound used in the removal high and low VOC polysulfide primers, sealants and other coatings for metallic aircraft surfaces. Download Info.

A water-based ready-to-use exterior aircraft cleaner to remove dirt, grime, oils, hydraulic fluid and other soils. Download Info

A versatile, concentrated liquid compound, used in cleaning wheel wells, wing butts, flaps and bellies of painted and unpainted aircraft, including exterior surfaces.  This product was developed to be used in circumstances where petroleum solvents cannot be used.   Download TDS

A concentrated aqueous compound formulated to clean aircraft exterior surfaces including gear wells, wing flap areas, and equipment bilges. Download Info

A concentrated aqueous compound formulated to clean aircraft exterior surfaces including gear wells, wing flap areas, and equipment bilges. Download Info

A concentrated liquid compound for gas path, compressor and fuel nozzle cleaning, in portable or statinary turbine engines. Effective in cleaning compressor blades, stators, air passages, etc in turbne engines. Safeguards against abnormal temperature increases, power loss and increases in fuel consumption. Download Info

A viscous, low-odor hydrogen peroxide activated paint remover, effective in removing resistant catalyzed finishes and other type finishes. Download Info. Download TDS.

A ready-to-use hydrogen peroxide activated, viscous paint remover for aircraft exteriors.  This product is formulated to be effective on both composite and metallic surfaces and is highly efficient in removing resistant catalyzed finishes and other type finishes.  With a shelf life of 12+ months, B&B 9095 is non-drying and has a low EHS impact, as it does not contain methylene chloride or NMP. Download Info

A gel-type aircrafft exterior cleaner used to remove medium to heavy soils from exterior surfaces. Download Info.

An aqueous cleaner concentrate for turbine engine gas path cleaning for off-line and on-line engine cleaning. When used as directed, it is effective in cleaning compressor blades, stators, air passages, etc in turbine engines. Download Info

A viscous aircraft exterior cleaner engineered for difficult to clean areas, including wheel well/ wing butt areas.  It effectively clings to vertical and inverted surfaces without run-off.   Download TDS

 A gel-type exterior aircraft cleaner designed for removing heavy soils. Clings well to vertical and overhead surfaces with minimum run-off. It can also be used for spot cleaning. Download Info.

Vantage B&B 9201 is a hot, diphase immersion paint remover for aircraft wheels, landing gear, and other aircraft ground equipment (AGE) components. B&B 9201 may be used with a mineral oil seal (B&B 9201 Additive O) to minimize evaporative loss and odor.  Download TDS.

Very popular vapor degreasing solution based on highly stabilized n-propyl bromide (nPB). Designed to remove difficult soils including adhesives, greases, hydraulic fluids, metalworking fluids, oils, sealants, waxes. Extend solvent life with Vantage’s high performance nPB Super Booster additive. Aerospace approvals. Download Info – Download Info.

Non-foaming aqueous cleaner designed for highly agitated parts washing equipment such as cabinet spray washers and inline belt washers. Approved by a wide range of aerospace OEMs. Safe for use on composites, faying surfaces, metals, plastics. Does not contain NPEs or APEs. Download Info.

The USDA Certified Biobased Product Label verifies this cleaner is composed of 98% renewable biobased ingredients. Quickly removes adhesives, asphalt, corrosion inhibitors, greases, sealants, tar and other hard-to-clean soils. Commonly used to clean interior and exterior aircraft surfaces. Aerospace approved D-limonene cleaner. Download Info – Download Info.

Aqueous immersion cleaner designed for agitated and ultrasonic parts washing equipment. Formulated for aerospace alloys, CleanSafe 686 exhibits excellent materials compatibility in all market segments and effective removal of difficult soils including carbon, buffing compounds, heavy greases. Easy rinsing, hard water stable and built-in corrosion protection. Download Info.

Fluorinated-based vapor degreasing solvent designed to replace trichloroethylene (TCE), perchloroethyelene (PERC), n-propyl-bromide (nPB) and hydrochlorofluorocarbons (HCFCs) such as AK225. Not a hazardous air pollutant (HAP). Low toxicity, non-flammable, non-ozone depleting. Also used as a manual cleaner in applications requiring fast to immediate evaporation. Aerospace approvals. Download Info – Download Info.

Halogen-free cleaner based on balanced blend of refined hydrocarbons and modified alcohols. Suitable for use in sealed cleaning systems from Amsonic, Durr, IFP, Pero. Designed to remove oil and water-soluble soils such as buffing and polishing compounds, greases, mineral oils, water-soluble emulsions. Download Info

BIOACT 108 Precision Cleaner is a highly refined, USDA Certified Biobased solvent formulated to meet the performance, compatibility and environmental requirements of the aerospace industry. It is selected when a powerful cleaner is required with fast dry times and low surface residues. BIOACT 108 is a direct replacement for acetone, isopropyl alcohol (IPA), methyl ethyl ketone (MEK), toluene and other low flash point, high vapor pressure and toxic solvents.It is compatible with many polymeric substrates, elastomers and is safe for use with ferrous and non-ferrous alloys. Download Info – Download Info