Engine Overhaul

pre_cleaning.jpg

PRE-CLEANING PRODUCTS

descaling.jpg

DESCALING PRODUCTS

additive.jpg

ADDITIVE PRODUCTS

carbon-removers.jpg

SILICONE, PAINT AND CARBON REMOVERS

corrosion-inhibitor.jpg

CORROSION INHIBITOR PRODUCTS


PRE-CLEANING PRODUCTS

Cee-Bee® A-7X7 – Aqueous Alkaline Cleaner

Cee-Bee® A-7X7 is an aqueous alkaline cleaner used for immersion, ultrasonic, spray/rinse, steam injection and pre/post NDT cleaning applications. Cee-Bee® A-7X7 is also approved for turbine engine degreasing prior to teardown. Download TDS

Cee-Bee® A-7X7S is an aqueous alkaline cleaner used for immersion, ultrasonic, spray/rinse, steam injection and pre/post NDT cleaning applications. Cee-Bee® A-7X7S is also approved for turbine engine degreasing prior to teardown. Download TDS.

Cee-Bee® C-46 is a heavy duty, hot tank cleaner specifically designed for cleaning engine parts and radiators during overhaul. Download TDS.

Cee-Bee® EPC 1 is a concentrated neutral water-based detergent cleaning fluid for cleaning and corrosion inhibition of gas turbine engine compressors. Download TDS.

Super Bee™ 262 Gel is a non-solvent, highly-concentrated gel specifically designed for degreasing turbine engines prior to tear down and for exterior aircraft cleaning. Download TDS.

Super Bee™ 300LF is a low foaming aqueous alkaline cleaner for immersion, spray wash, spray/rinse, steam injection, ultrasonic and pre/post NDT Cleaning Applications. Download TDS.

Super Bee™ 300LFG is a low-foaming liquid aqueous degreaser approved for immersion, spray wash, spray rinse, steam injection, ultrasonic, and pre/post NDT cleaning applications. It is safe on all common aircraft and turbine engine alloys when used as directed. Contains no nonyl-phenol ethoxylates (NPE). Download TDS.

Super Bee™ 300LFM is a low-foaming liquid concentrate for use in spray wash and immersion cleaning applications. Download TDS.

DESCALING PRODUCTS

Cee-Bee® C-623

Cee-Bee® C-623 is an inhibited phosphoric acid cleaner and descaler that is used in a multi-step cleaning process with Cee-Bee® J-84AL, J-88L and J-3. Download TDS.

Cee-Bee® J-2 is a mildly acidic liquid scale remover for corrosion resistant steels and nickel and cobalt-based alloys. Cee-Bee® J-2 is typically used in various combinations with Super Bee™ 300LF/G, Cee-Bee® J-84AL and Cee-Bee® J-88L. Download TDS.

Cee-Bee® J-3 is a mildly acidic liquid scale remover for use in hot section, multi-step turbine engine overhaul cleaning processes. Cee-Bee® J-3 is normally used together with Super Bee™ 300LF/G or Cee-Bee® A-7X7, Cee-Bee® J-84AL, Cee-Bee® J-88L and Cee-Bee® C-623 as part of various multi-step overhaul cleaning processes. Download TDS.

Cee-Bee® J-84A is a highly alkaline powder used for removing rust, high-temperature oxides, carbon, dry film lubricant and aluminized paints from hot section turbine engine components. Cee-Bee® J-84A is typically used in multi-step cleaning processes in conjunction with Super Bee™ 300LF/G or Cee-Bee® A-7X7 aqueous degreasers, Cee-Bee® J-88L alkaline permanganate and Cee-Bee® J-3 and/or Cee-Bee® C-623 acid descalers. Download TDS.

Cee-Bee® J-84AL is a concentrated, highly-alkaline liquid cleaner used for removing rust, high-temperature oxides, carbon, dry film lubricant and aluminized paints from hot section turbine engine components. Cee-Bee® J-84AL is typically used in multi-step cleaning processes in conjunction with Super Bee™ 300LF/G or Cee-Bee® A-7X7 aqueous degreasers, Cee-Bee® J-88L alkaline permanganate and Cee-Bee® J-3 and/or Cee-Bee® C-623 acid descalers. Download TDS.

Cee-Bee® J-88 is a powdered alkaline permanganate scale conditioner used in various multi-step turbine engine cleaning processes. Cee-Bee® J-88 is typically used in conjunction with Super Bee™ 300LF/G, Cee-Bee® J-84AL, Cee-Bee® J-3 and Cee-Bee® 623. Download TDS.

Cee-Bee® J-88L is a liquid alkaline permanganate scale conditioner used in various multi-step turbine engine cleaning processes. Cee-Bee® J-88L is typically used in conjunction with Super Bee™ 300LF/G, Cee-Bee® J-84AL, Cee-Bee® J-3 and Cee-Bee® C-623. Download TDS.

Cee-Bee® J-89 is a highly alkaline powder used for conditioning heat scale on titanium alloys prior to pickling. Download TDS.

ADDITIVE PRODUCTS

Cee-Bee® A-215 Additive S

Cee-Bee® A-215 Additive S is used to maintain solvent in Cee-Bee® A-215 baths. Download TDS.

Cee-Bee® A-477 Additive A

Cee-Bee® A-477 Additive A is used to maintain the alkalinity level of Cee-Bee® A-477. Download TDS.

Cee-Bee® A-477 Additive 0

Cee-Bee® A-477 Additive O is used to maintain the oil seal level of Cee-Bee® A-477. Download TDS.

Cee-Bee® Additive GO-2L

Cee-Bee® Additive GO-2L is used to maintain the sequesterant concentration in Cee-Bee® J-84A, J-84AL and J-86C-6 solutions. Download TDS.

Cee-Bee® Anti-Foam Additive

Cee-Bee® Anti-Foam Additive is a fast-acting, non-silicone, organic antifoaming agent that can be used to de-foam various cleaning solutions in agitated immersion and high-pressure spray wash applications. Download TDS.

Cee-Bee® J-88 Additive P

Cee-Bee® J-88 Additive P is an additive used to make up for drag-out losses and active ingredients consumed during the cleaning process. Download TDS.

Cee-Bee® J-88 Additive PL

Cee-Bee® J-88 Additive PL is an additive used to make up for drag-out losses and active ingredients consumed during the cleaning process. Download TDS.

Cee-Bee® J-91 Additive O

Cee-Bee® J-91 Additive O is an additive designed to maintain the oil seal level on Cee-Bee® J-91. Download TDS.

Super Bee™ 300LF Liquid pH Adjuster

Super Bee™ 300LF Liquid pH Adjuster is an alkaline additive used to maintain the pH of Super Bee™ 300LF/300LFG/300LFM and Cee-Bee® A-7X7 cleaning solutions. Download TDS.

Super Bee™ 300LF pH Adjuster

Super Bee™ 300LF pH Adjuster is a solid alkaline additive used to maintain the pH of Super Bee™ 300LF/300LFG/300LFM and Cee-Bee® A-7X7 cleaning solutions. Download TDS.

SILICONE, PAINT AND CARBON REMOVERS

Cee-Bee® A-215

Cee-Bee® A-215 is a diphase, solvent-base, alkaline cold-tank paint and carbon remover. Download TDS.

Cee-Bee® A-477 is a non-methylene chloride, alkaline, diphase, hot tank paint and carbon remover. Download TDS.

Cee-Bee® A-480 is a water-based, heated, immersion solvent cleaner specifically designed to remove carbon and other tenacious soils from turbine engine components. Cee-Bee® A-480 can be used as an alternative or subsequent cleaning process to light-duty aqueous degreasing when used as directed. Download TDS.

Cee-Bee® ALKO is a viscous, alkaline, water-based heavy-duty cleaner and corrosion and carbon remover. Cee-Bee® Alko is also effective in removing coked oils from turbine engine components. Download TDS.

Cee-Bee® C-105HF is an acid-activated, water-thin product designed to remove silicone sealants, resins, paints, and adhesives. Download TDS.

Cee-Bee® C-105NC is a thin, acid-activated product for removing silicone sealants, resins, paints, and adhesives. Download TDS.

Cee-Bee® J-84A is a highly alkaline powder used for removing rust, high-temperature oxides, carbon, dry film lubricant and aluminized paints from hot section turbine engine components. Cee-Bee® J-84A is typically used in multi-step cleaning processes in conjunction with Super Bee™ 300LF/G or Cee-Bee® A-7X7 aqueous degreasers, Cee-Bee® J-88L alkaline permanganate and Cee-Bee® J-3 and/or Cee-Bee® C-623 acid descalers. Download TDS.

Cee-Bee® J-84AL is a concentrated, highly-alkaline liquid cleaner used for removing rust, high-temperature oxides, carbon, dry film lubricant and aluminized paints from hot section turbine engine components. Cee-Bee® J-84AL is typically used in multi-step cleaning processes in conjunction with Super Bee™ 300LF/G or Cee-Bee® A-7X7 aqueous degreasers, Cee-Bee® J-88L alkaline permanganate and Cee-Bee® J-3 and/or Cee-Bee® C-623 acid descalers. Download TDS.

Cee-Bee® J-91 is a diphase, highly active, cold paint, dry film lubricant, and resistant coatings remover. Download TDS.

Cee-Bee® P-109B is a powdered material to be added to nitric acid solutions for removal of oxides and baked-on graphite from titanium and nickel alloys. Download TDS.

CORROSION INHIBITOR PRODUCTS

Cee-Bee® MX-15U

Cee-Bee® MX-15U is a product used to inhibit oxidation of steel, aluminum, magnesium and other metals. Cee-Bee® MX-15U is available as a powder or as a liquid concentrate. Download TDS

Cee-Bee® Nortex 3025

Cee-Bee® Nortex 3025 is a water-based liquid that provides short-term temporary corrosion inhibition for ferrous metals. Download TDS.

Cee-Bee® WDO

Cee-Bee® WDO is a high-flash water-displacing oil designed to provide anti-rust protection. Download TDS.

Need more information?

icon quote

Request a Quote

At ACS we are ready to meet your needs. Please fill out the form and we will attend you shortly

icon ContactUs

Contact Us

For any general or technical questions, ACS is here to help. Please fill out the form below and we will contact you