Met-L-Chek

head MLChek

Met-L-Chek® products are trusted by NDT professionals around the globe. Met-L-Chek® products are used throughout varies industries for in-process, final, and maintenance (in-service) inspections.

FlujorescentPenetrants

Fluorescent Penetrants

VisblePenetrants

Visible Penetrants

SpecialtyPenetrants

Specialty Penetrants

DEvelopers

Developers

Emulsifiers

Emulsifiers

CleanersRemovers

Cleaners & Removers

MagneticParticleInspection.jpg

Magnetic Particle Inspection

InspectionKits.jpg

Inspection Kits

AerosolProducts.jpg

Aerosol Products


FLUORESCENT PENETRANTS

Met-L-Chek® FP-921 Level 1 – Water Washable Fluorescent Penetrant

Met-L-Chek® FP-921 is a Level 1 water washable fluorescent penetrant. It is approved to AMS-2644 as a fluorescent (Type 1); Methods “A” and “C”; sensitivity Level 1 water washable inspection penetrant. Download TDS

Met-L-Chek® FP-922 – Level 2 Water Washable Fluorescent penetrant

Met-L-Chek® FP-922 is a Level 2 water washable fluorescent penetrant. It is approved to AMS-2644 as a fluorescent (Type 1); Methods “A” and “C”; sensitivity Level 2 inspection penetrant. Download TDS

Met-L-Chek® FP-923 – Level 3 Water Washable Fluorescent Penetrant

Met-L-Chek® FP-923 is a Level 3 water washable fluorescent penetrant. It is approved to AMS-2644 as a fluorescent (Type 1); Methods “A” and “C”; sensitivity Level 3 water washable inspection penetrant. Met-L-Chek® FP-923 is a Level 3 water washable fluorescent penetrant. It is approved to AMS-2644 as a fluorescent (Type 1); Methods “A” and “C”; sensitivity Level 3 water washable inspection penetrant. Download TDS

Met-L-Chek® Flp-1 – Type 1 Water Washable Fluorescent Penetrant

Met-L-Chek® FLP-1 is a water washable fluorescent inspection penetrant safe for plastics. This water-based fluorescent (Type 1) penetrant concentrate designed for through leak testing and general metal working surface flaw detection. It is free of petroleum solvents and oils, making it safe for use on many plastics that may be attacked by more traditional inspection penetrants. Download TDS

Met-L-Chek® FBP-911 – Level 1 Biodegradable Fluorescent Penetrant

Met-L-Chek® FBP-911 is a Level 1 biodegradable fluorescent penetrant. It is a special oil and solvent free formulation which utilizes biodegradable components and is VOC free. This water washable inspection penetrant is approved to AMS-2644 as a fluorescent (Type 1); Methods “A” and “C”; sensitivity Level 1. Download TDS

Met-L-Chek® FBP-912 – Level 2 Biodegradable Fluorescent Penetrant.

Met-L-Chek® FBP-912 is a Level 2 biodegradable fluorescent penetrant. It is made with is a special oil and solvent free formulation which utilizes biodegradable components and is VOC free. This water washable inspection penetrant is approved to AMS-2644 as a fluorescent (Type 1); Methods “A” and “C”; sensitivity Level 2. Download TDS

Met-L-Chek® FBP-913 – Level 3 Biodegradable Fluorescent Penetrant.

Met-L-Chek® FBP-913 is a Level 3 biodegradable fluorescent penetrant. It is made with a special oil and solvent free formulation which utilizes biodegradable components and is VOC free. This water washable inspection penetrant is approved to AMS-2644 as a fluorescent (Type 1); Methods “A” and “C”; sensitivity Level 3. Download TDS

Met-L-Chek® FBP-914 – Level 4 Biodegradable Fluorescent Penetrant

Met-L-Chek® FBP-914 is a Level 4 biodegradable fluorescent penetrant. It is made with a special oil and solvent free formulation which utilizes biodegradable components and is VOC free. This water washable inspection penetrant is approved to AMS-2644 as a fluorescent (Type 1); Methods “A” and “C”; sensitivity Level 4. Download TDS

Met-L-Chek® FP-93A(M) Level 2 – Post Emulsifiable Fluorescent Penetrant

Met-L-Chek® FP-93A(M) is a Level 2 post emulsifiable fluorescent penetrant. It is approved to AMS-2644 as a fluorescent (Type 1); Methods “B”, “C”, and “D”; sensitivity Level 2 post emulsifiable inspection penetrant. Download TDS.

Met-L-Chek® FP-95A(M) – Level 3 Post Emulsifiable Fluorescent Penetrant

Met-L-Chek® FP-95A(M) is a Level 3 post emulsifiable fluorescent penetrant. It is approved to AMS-2644 as a fluorescent (Type 1); Methods “B”, “C”, and “D”; sensitivity Level 3 post emulsifiable inspection penetrant. Download TDS.

Met-L-Chek® FP-97A(M) – Level 4 Post Emulsifiable Fluorescent Penetrant.

Met-L-Chek® FP-97A(M) is a Level 4 post emulsifiable fluorescent penetrant. It is approved to AMS-2644 as a fluorescent (Type 1); Methods “B”, “C”, and “D”; sensitivity Level 4 post emulsifiable inspection penetrant. Download TDS.

Visible Penetrants

Met-L-Chek® VP-30 – Visible Water Washable Penetrant

Met-L-Chek® VP-30 is a visible water washable penetrant. It is a visible (Type 2), water washable (Method A) and solvent removable (Method C) inspection penetrant. It is designed for use in general metalworking, welding, nuclear and automotive applications for surface flaw and through leak detection. Download TDS.

Met-L-Chek® VP-31A is a visible post emulsifiable penetrant. It is a visible (Type 2), post emulsifiable (Method B) and solvent removable (Method C) inspection penetrant. It is designed for use in general metalworking, welding, nuclear and automotive applications for surface flaw and through leak detection. Download TDS

Met-L-Chek® VBP-300 is a visible water washable penetrant that’s designed for use in general metalworking, welding, nuclear, and automotive to detect surface flaws. VBP-300 is widely used in the inspection of food and dairy processing equipment. It is a visible (Type 2), water washable (Method A) and solvent removable (Method C) inspection penetrant. Download TDS

Met-L-Chek® VP-302 is a special application high temperature inspection penetrant. Commonly used in field weld and weld repair inspection. VP-302 is also used in the inspection of refinery processing equipment at elevated temperatures. Met-L-Chek® VP-302 reduces inspection process time by eliminating the total cool down period required for standard penetrant. Download TDS.

RLP-1 is a water-based, dual light response visible and fluorescent (Type 3) penetrant. It is designed for through leak testing and general metal working surface flaw detection and gives visible red indications under white light and fluorescent orange indications under UV-A illumination. In the fluorescent mode of inspection smaller discontinuities may be detected than in the visible mode. It is a biodegradable penetrant being free of solvents and oils making it useful for inspection on plastics that may be attacked by more traditional penetrants. Being a water based penetrant it may be diluted with water to fit the inspection needs. The most common dilutions are 1:1 and 3:1 water to RLP-1. For Method C applications it is used with E-59, E-59A, R-503, and R-504. Download TDS.

SPECIALTY INSPECTION PRODUCTS

Met-L-Chek® D-702 – High Temperature Inspection Developer

Met-L-Chek® D-702 is a special application high temperature inspection developer, form “f”, used with Met-L-Chek® VP-302 to enhance detection of surface cracks and porosity on hot surfaces. Met-L-Chek® D-702 dries quickly and produces a thin white film, which is easily removed with water after inspection. Commonly used in field welding and welding repair inspection, D-702 is also used in the inspection of refinery processing equipment at elevated temperatures. Met-L-Chek® D-702 reduces inspection process time by eliminating the total cool down period required for standard penetrant. Download TDS.

Met-L-Chek® FLP-1 is a water washable fluorescent inspection penetrant safe for plastics. This water-based fluorescent (Type 1) penetrant concentrate designed for through leak testing and general metal working surface flaw detection. It is free of petroleum solvents and oils, making it safe for use on many plastics that may be attacked by more traditional inspection penetrants. Download TDS.

Met-L-Chek® R-502 is a special application high temperature inspection penetrant remover used as a Method “C” remover. Commonly used in field welding and welding repair inspection, R-502 is also used in the inspection of refinery processing equipment at elevated temperatures. Met-L-Chek® R-502 reduces inspection process time by eliminating the total cool down period required for standard penetrant. (See list of approvals below.). Download TDS.

Met-L-Chek® VP-302 is a special application high temperature inspection penetrant. Commonly used in field weld and weld repair inspection. VP-302 is also used in the inspection of refinery processing equipment at elevated temperatures. Met-L-Chek® VP-302 reduces inspection process time by eliminating the total cool down period required for standard penetrant. Download TDS.

RLP-1 is a water-based, dual light response visible and fluorescent (Type 3) penetrant. It is designed for through leak testing and general metal working surface flaw detection and gives visible red indications under white light and fluorescent orange indications under UV-A illumination. In the fluorescent mode of inspection smaller discontinuities may be detected than in the visible mode. It is a biodegradable penetrant being free of solvents and oils making it useful for inspection on plastics that may be attacked by more traditional penetrants. Being a water based penetrant it may be diluted with water to fit the inspection needs. The most common dilutions are 1:1 and 3:1 water to RLP-1. For Method C applications it is used with E-59, E-59A, R-503, and R-504. Download TDS.

WLF-71 is a liquid dye additive which dissolves in water making the water fluoresce under UV-A ( ultra violet) light. This dye additive is commonly used to help locate leaks in large storage tanks but can also be used to locate leaks in small water reservoirs such as radiators. In practice, it is dissolved in the water in the tank, and then suspected areas of leakage, such as riveted or welded seams, are examined on the exterior of the tank, using a UV-A light. Any place where the water has leaked through the tank will show up as a fluorescent wet spot. Download TDS.

DEVELOPERS

Met-L-Chek® D-70 – Non-Aqueous Developer

Met-L-Chek® D-70 is a non-aqueous developer used in inspection Methods A, B, C, & D. Used with fluorescent penetrants as form “d” and with visible penetrants as form “e”, D-70 is available in aerosol and liquid forms. It is applied after the surface penetrant has been removed and the inspection surface dried. Download TDS.

Met-L-Chek® D-702 is a special application high temperature inspection developer, form “f”, used with Met-L-Chek® VP-302 to enhance detection of surface cracks and porosity on hot surfaces. Met-L-Chek® D-702 dries quickly and produces a thin white film, which is easily removed with water after inspection. Commonly used in field welding and welding repair inspection, D-702 is also used in the inspection of refinery processing equipment at elevated temperatures. Met-L-Chek® D-702 reduces inspection process time by eliminating the total cool down period required for standard penetrant. Download TDS.

Met-L-Chek® D-72A is a form “a” dry powder developer used with fluorescent penetrants per AMS-2644 and ASTM E-1417. D-72A consists of light fluffy absorbent, low toxicity powders. Download TDS.

Met-L-Chek® D-76B is water soluble form “b” developer used with fluorescent (Type 1), Method B & D penetrants per AMS-2644 and ASTM E-1417. Download TDS.

Met-L-Chek® D-78B is a water-suspendible form “c” developer used with fluorescent (Type 1), and visible (Type 2) penetrants per AMS-2644 and ASTM E-1417. Download TDS.

EMULSIFIERS

Met-L-Chek® E-50 – Lipophilic Emulsifier

E-50 is a Method B lipophilic inspection penetrant emulsifier used with VP-31A red visible (Type 2) penetrant. It is designed to be sprayed onto the post emulsifiable penetrant to render the penetrant water washable. It is a fast acting emulsifier so very short contact time with the penetrant is required. Some users apply the emulsifier by brush and flow on techniques but these methods are not as efficient as spray.

E-50 emulsifier is ideal for use on rough castings and other metal surfaces which tend to retain penetrant readily, which causes high background and difficulty in evaluating indications.It is effective in rendering most light oily soils water washable and has been used as a pre-wash cleaner for tough to clean surfaces. It has found use as a concrete cleaner for the removal of oily residues. The emulsifier is applied, allowed to soak in for a few minutes , and then washed off with water spray. Download TDS.

Met-L-Chek® E-57 is a Method B lipophilic inspection penetrant emulsifier approved to AMS-2644 for use with Met-L-Chek® FP-93A(M), FP-95A(M), and FP-97A(M) fluorescent (Type 1) post emulsifiable penetrants. Download TDS.

Met-L-Chek® E-58D is a Method D (hydrophilic) inspection penetrant emulsifier approved to AMS-2644 for use with Met-L-Chek® FP-93A(M), FP-95A(M), and FP-97A(M) fluorescent (Type 1) post emulsifiable penetrants. Download TDS.

CLEANERS & REMOVERS

Met-L-Chek® 300lf – Aqueous Alkaline Cleaner

MLC-300LF is an aqueous alkaline cleaner used for pre-cleaning in preparation for penetrant inspection. MLC-300LF is approved for use on aerospace components for general degreasing and cleaning and is similarly used in non-aerospace applications. Effective in removing oily soils, light grease, finger prints, cutting fluids and coolants, salt residues, loose scale and rust. Download TDS.

Met-L-Chek® E-59 is a non-halogenated penetrant remover. It is a class 2 (non-halogenated), Method C inspection penetrant remover. Ideal for penetrant wipe removal, E-59 is a slow dry rate material used in general metalworking, welding, nuclear and automotive applications. Met-L-Chek® E-59 is NOT used as a pre-inspection surface cleaner. Download TDS.

Met-L-Chek® E-59A is a class 2 (non-halogenated), Method C inspection penetrant remover. Ideal for penetrant wipe removal and pre-inspection surface cleaning, E-59A is a moderate dry rate material used in general metalworking, welding, nuclear, aerospace and automotive applications. Download TDS.

Met-L-Chek® R-502 is a special application high temperature inspection penetrant remover used as a Method “C” remover. Commonly used in field welding and welding repair inspection, R-502 is also used in the inspection of refinery processing equipment at elevated temperatures. Met-L-Chek® R-502 reduces inspection process time by eliminating the total cool down period required for standard penetrant. (See list of approvals below.). Download TDS.

Met-L-Chek® R-503 is a class 2 (non-halogenated), Method C inspection penetrant remover. Ideal for penetrant wipe removal and pre-inspection surface cleaning, R-503 is a moderate dry rate material used in general metalworking, welding, nuclear, aerospace applications. Met-L-Chek® R-503 is ideal for penetrant test panel storage and cleaning star burst cracks on TAM panels. Download TDS.

Met-L-Chek® R-504 is a class 2 (non-halogenated), Method C inspection penetrant remover. Ideal for penetrant wipe removal and verification of indications, R-504 is a flash dry rate material used in general metalworking, welding, nuclear, aerospace applications. Met-L-Chek® R-504 is ideal for penetrant test panel storage and cleaning star burst cracks on TAM panels. Download TDS.

MLC 300LF Liquid pH Adjuster is an alkaline additive used to maintain the pH of MLC 300LF cleaning solutions. Download TDS.

magnetic particle inspection

Met-L-Chek® Mpi-86B – Blue Magnetic Particles

MPI-86B is a blue magnetic particle powder designed for white light visible dry method inspection. MPI-86B may be used on hot surfaces up to 800˚F (426˚C). Download TDS

Met-L-Chek® MPI-86G – Grey Magnetic Particles

MPI-86B is a grey magnetic particle powder designed for white light visible dry method inspection. MPI-86B may be used on hot surfaces up to 800˚F (426˚C). Download TDS

Met-L-Chek® Mpi-86R – Red Magnetic Particles

MPI-86R is a red magnetic particle powder designed for white light visible dry method inspection. MPI-86R may be used on hot surfaces up to 800˚F (426˚C). Download TDS

Met-L-Chek® Mpi-86Y – Yellow Magnetic Particles

MPI-86B is a yellow magnetic particle powder designed for white light visible dry method inspection. MPI-86B may be used on hot surfaces up to 800˚F (426˚C). Download TDS

Met-L-Chek® MPI-1400 – Fluorescent Magnetic Particles

Met-L-Chek® MPI-1400 is a fluorescent magnetic particle powder designed for high sensitivity wet method inspection. MPI-1400 meets the requirements of AMS 3044 and ASTM E-1444. Download TDS

Met-L-Chek® MPI-1400B – Fluorescent Magnetic Particle Bath

Met-L-Chek® 1400B is a premixed, ready-to-use, fluorescent magnetic particle bath designed for high sensitivity fluorescent wet method inspection. 1400B meets the requirements of AMS 3045 and ASTM E-1444. Download TDS

Met-L-Chek® MPI-80 – Visible Black Magnetic Particle Bath

MPI-80 is a premixed, ready-to-use, visible black magnetic particle bath designed for high sensitivity visible magnetic particle inspection. MPI-80 is MPI-80P mixed in MPI-Carrier Fluid C2 and particle flow stabilizers. Download TDS

Met-L-Chek® MPI-Fluid C2 – Petroleum-Based Magnetic Particle Bath

Met-L-Chek® MPI-Fluid C2 is a specialty petroleum based magnetic particle bath vehicle designed for high sensitivity fluorescent magnetic particle suspension. MPI-Fluid C2 is free of natural fluorescence, reducing inspection background noise. Met-L-Chek® MPI-Fluid C2 is a low viscosity material, which improves magnetic particle mobility. Download TDS

Met-L-Chek® WCP-81 – Fast Drying White Contrast Paint

WCP-81 is a specially formulated, fast drying white contrast paint that is used to create a consistent background on the component surface to increase contrast for fine flaw detection with the black visible particles in MPI-80P. When dry, the white contrast paint is resistant to the wet method baths used for inspection, but is easily removed from the demagnetized component surface with a solvent cleaner such as R-504. (MPI-80 is a premixed, ready-to-use, visible black magnetic particle bath designed for high sensitivity visible magnetic particle inspection.). Download TDS

Inspection Kits

Met-L-Chek® Visible Inspection Kit – Method A & C (4-Can) 

Met-L-Chek® Visible Inspection Kit – Method A & C (4-Can) is a combination of three Met-L-Chek® visible inspection aerosol products, a spray can holder, and metal brush all packaged in a heavy-duty metal container. Met-L-Chek® kits are perfect for field inspections and many other applications.

CONTENTS

  • Met-L-Chek® VP-30 – 1 Can (Visible Penetrant)
  • Met-L-Chek® E-59A – 2 Cans (Penetrant Remover)
  • Met-L-Chek® D-70 – 1 Can (Developer)
  • Wire Brush
  • Spray Can Holder
  • Red Metal Box
Met-L-Chek® Visible Inspection Kit – Method A & C (8-Can) 

Met-L-Chek® Visible Inspection Kit – Method A & C (8-Can) is a combination of three Met-L-Chek® visible inspection aerosol products, a spray can holder, and metal brush all packaged in a heavy-duty metal container. Met-L-Chek® kits are perfect for field inspections and many other applications.

CONTENTS

  • Met-L-Chek® VP-30 – 2 Cans (Visible Penetrant)
  • Met-L-Chek® E-59A – 4 Cans (Penetrant Remover)
  • Met-L-Chek® D-70 – 2 Cans (Developer)
  • Wire Brush
  • Spray Can Holder
  • Red Metal Box
Met-L-Chek® Visible Inspection Kit – Method A & C (9-Can)

Met-L-Chek® Visible Inspection Kit – Method A & C (9-Can) is a combination of three Met-L-Chek® visible inspection aerosol products. Met-L-Chek® kits are perfect for field inspections and many other applications.

  • Met-L-Chek® VP-30 – 3 Cans (Visible Penetrant)
  • Met-L-Chek® E-59A – 3 Cans (Penetrant Remover)
  • Met-L-Chek® D-70 – 3 Cans (Developer)
Met-L-Chek® Visible Inspection Kit – Method C (4-Can) 

Met-L-Chek® Visible Inspection Kit – Method C (4-Can) is a combination of three Met-L-Chek® visible inspection aerosol products, a spray can holder, and metal brush all packaged in a heavy-duty metal container. Met-L-Chek® kits are perfect for field inspections and many other applications.

CONTENTS

  • Met-L-Chek® VP-31A – 1 Can (Visible Penetrant)
  • Met-L-Chek® E-59A – 2 Cans (Penetrant Remover)
  • Met-L-Chek® D-70 – 1 Can (Developer)
  • Wire Brush
  • Spray Can Holder
  • Red Metal Box
Met-L-Chek® Visible Inspection Kit – Method C (8-Can)

Met-L-Chek® Visible Inspection Kit – Method C (8-Can) is a combination of three Met-L-Chek® visible inspection aerosol products, a spray can holder, and metal brush all packaged in a heavy-duty metal container. Met-L-Chek® kits are perfect for field inspections and many other applications.

CONTENTS

  • Met-L-Chek® VP-31A – 2 Cans (Visible Penetrant)
  • Met-L-Chek® E-59A – 4 Cans (Penetrant Remover)
  • Met-L-Chek® D-70 – 2 Cans (Developer)
  • Wire Brush
  • Spray Can Holder
  • Red Metal Box
Met-L-Chek® Visible Inspection Kit – Method C (9-Can)

Met-L-Chek® Visible Inspection Kit – Method C (9-Can) is a combination of three Met-L-Chek® visible inspection aerosol products. Met-L-Chek® kits are perfect for field inspections and many other applications.

CONTENTS

  • Met-L-Chek® VP-31A – 3 Cans (Visible Penetrant)
  • Met-L-Chek® E-59A – 3 Cans (Penetrant Remover)
  • Met-L-Chek® D-70 – 3 Cans (Developer)
Met-L-Chek® Visible Inspection Kit – Method C (12-Can) 

Met-L-Chek® Visible Inspection Kit – Method C (12-Can) is a combination of three Met-L-Chek® visible inspection aerosol products. Met-L-Chek® kits are perfect for field inspections and many other applications.

CONTENTS

  • Met-L-Chek® VP-31A – 2 Cans (Visible Penetrant)
  • Met-L-Chek® E-59A – 6 Cans (Penetrant Remover)
  • Met-L-Chek® D-70 – 4 Cans (Developer)
Visible Inspection Kit – Method A And C (4-Can)

Met-L-Chek® Fluorescent Inspection Kit – Method A & C (4-Can) is a combination of three Met-L-Chek® fluorescent inspection aerosol products, a spray can holder, and metal brush all packaged in a heavy-duty metal container. Met-L-Chek® kits are perfect for field inspections and many other applications.

CONTENTS

  • Met-L-Chek® FP-923 – 1 Can (Fluorescent Penetrant – Level 3)
  • Met-L-Chek® E-59A – 2 Cans (Penetrant Remover)
  • Met-L-Chek® D-70 – 1 Can (Developer)
  • Wire Brush
  • Spray Can Holder
  • Red Metal Box
Visible Inspection Kit – Method A And C (8-Can)

Met-L-Chek® Fluorescent Inspection Kit – Method A & C (8-Can) is a combination of three Met-L-Chek® fluorescent inspection aerosol products, a spray can holder, and metal brush all packaged in a heavy-duty metal container. Met-L-Chek® kits are perfect for field inspections and many other applications.

CONTENTS

  • Met-L-Chek® FP-923 – 2 Cans (Fluorescent Penetrant – Level 3)
  • Met-L-Chek® E-59A – 4 Cans (Penetrant Remover)
  • Met-L-Chek® D-70 – 2 Cans (Developer)
  • Wire Brush
  • Spray Can Holder
  • Red Metal Box
Visible Inspection Kit – Method A And C (9-Can)

Met-L-Chek® Fluorescent Inspection Kit – Method A & C (9-Can) is a combination of three Met-L-Chek® fluorescent inspection aerosol products. Met-L-Chek® kits are perfect for field inspections and many other applications.

CONTENTS

Visible Inspection Kit – Method C (4-Can)

Met-L-Chek® Fluorescent Inspection Kit – Method C (4-Can) is a combination of three Met-L-Chek® fluorescent inspection aerosol products, a spray can holder, and metal brush all packaged in a heavy-duty metal container. Met-L-Chek® kits are perfect for field inspections and many other applications.

CONTENTS

  • Met-L-Chek® FP-95A(M) – 1 Can (Fluorescent Penetrant – Level 3)
  • Met-L-Chek® E-59A – 2 Cans (Penetrant Remover)
  • Met-L-Chek® D-70 – 1 Can (Developer)
  • Wire Brush
  • Spray Can Holder
  • Red Metal Box
Visible Inspection Kit – Method C (8-Can)

Met-L-Chek® Fluorescent Inspection Kit – Method C (8-Can) is a combination of three Met-L-Chek® fluorescent inspection aerosol products, a spray can holder, and metal brush all packaged in a heavy-duty metal container. Met-L-Chek® kits are perfect for field inspections and many other applications.

CONTENTS

  • Met-L-Chek® FP-95A(M) – 2 Cans (Fluorescent Penetrant – Level 3)
  • Met-L-Chek® E-59A – 4 Cans (Penetrant Remover)
  • Met-L-Chek® D-70 – 2 Cans (Developer)
  • Wire Brush
  • Spray Can Holder
  • Red Metal Box
Visible Inspection Kit – Method C (9-Can)

Met-L-Chek® Fluorescent Inspection Kit – Method C (9-Can) is a combination of three Met-L-Chek® fluorescent inspection aerosol products. Met-L-Chek® kits are perfect for field inspections and many other applications.

CONTENTS

  • Met-L-Chek® FP-95A(M) – 3 Cans (Fluorescent Penetrant – Level 3)
  • Met-L-Chek® E-59A – 3 Cans (Penetrant Remover)
  • Met-L-Chek® D-70 – 3 Cans (Developer)

Visible Magnetic Particle Inspection Kit (4 can)

Met-L-Chek® Visible Magnetic Particle Inspection Kit (4-Can) is a combination of three Met-L-Chek® magnetic particle inspection aerosol products, a spray can holder, and metal brush all packaged in a heavy-duty metal container. Met-L-Chek® kits are perfect for field inspections and many other applications.

CONTENTS

  • Met-L-Chek® MPI-80 – 1 Can (Visible Black Magnetic Particle)
  • Met-L-Chek® R-504 – 1 Can (Cleaner & Remover)
  • Met-L-Chek® WCP-81 – 2 Cans (White Contrast Paint)
  • Wire Brush
  • Spray Can Holder
  • Red Metal Box

Visible Magnetic Particle Inspection Kit (4 can)

Met-L-Chek® Visible Magnetic Particle Inspection Kit (8-Can) is a combination of three Met-L-Chek® magnetic particle inspection aerosol products, a spray can holder, and metal brush all packaged in a heavy-duty metal container. Met-L-Chek® kits are perfect for field inspections and many other applications.

CONTENTS

  • Met-L-Chek® MPI-80 – 3 Cans (Visible Black Magnetic Particle)
  • Met-L-Chek® R-504 – 1 Can (Cleaner & Remover)
  • Met-L-Chek® WCP-81 – 4 Cans (White Contrast Paint)
  • Wire Brush
  • Spray Can Holder
  • Red Metal Box

AEROSOL PRODUCTS

Met-L-Chek® D-70 – Aerosol Non-Aqueous Developer

Met-L-Chek® D-70 is a non-aqueous developer used in inspection Methods A, B, C, & D. Used with fluorescent penetrants as form “d” and with visible penetrants as form “e”, D-70 is available in aerosol and liquid forms. It is applied after the surface penetrant has been removed and the inspection surface dried. Download TDS.

Met-L-Chek® E-59 is a class 2 (non-halogenated), Method C inspection penetrant remover. Ideal for penetrant wipe removal. It is a slow dry rate material used in general metalworking, welding, nuclear and automotive applications. Met-L-Chek® E-59 is NOT used as a pre-inspection surface cleaner. Download TDS.

Met-L-Chek® E-59A is a class 2 (non-halogenated), Method C inspection penetrant remover. Ideal for penetrant wipe removal and pre-inspection surface cleaning, E-59A is a moderate dry rate material used in general metalworking, welding, nuclear, aerospace and automotive applications. Download TDS.

Met-L-Chek® FP-923 is a Level 3 sensitivity water washable inspection penetrant. It’s approved to AMS-2644 as a fluorescent (Type 1) for Methods “A” and “C”. FP-923 is approved for high sensitivity aerospace applications. Download TDS.

Met-L-Chek® FP-95A(M) is a Level 3 sensitivity post emulsifiable inspection penetrant. It’s approved to AMS-2644 as a fluorescent (Type 1) for Methods “B”, “C”, and “D”. FP-95A(M) meets requirements for high sensitivity aerospace applications. Download TDS.

Met-L-Chek® 1400B is a premixed, ready-to-use, fluorescent magnetic particle bath designed for high sensitivity fluorescent wet method inspection. 1400B meets the requirements of AMS 3045 and ASTM E-1444. Download TDS.

MPI-80 is a premixed, ready-to-use, visible black magnetic particle bath designed for high sensitivity visible magnetic particle inspection. MPI-80 is MPI-80P mixed in MPI-Carrier Fluid C2 and particle flow stabilizers. It is often used with WCP-81 white contrast paint to increase contrast for fine flaw detection. Download TDS.

Met-L-Chek® R-503 is an a class 2 (non-halogenated) inspection penetrant remover used for Method C. It’s ideal for penetrant wipe removal and pre-inspection surface cleaning. R-503 is a moderate dry rate material used in general metalworking, welding, nuclear, and aircraft applications. Met-L-Chek® R-503 is ideal for penetrant test panel storage and cleaning star burst cracks on TAM panels. Download TDS.

Met-L-Chek® R-504 – Aerosol Inspection Penetrant Remover

Met-L-Chek® R-504 is a class 2 (non-halogenated), Method C inspection penetrant remover. Ideal for penetrant wipe removal and verification of indications. It is a flash dry rate material used in general metalworking, welding, nuclear, and aerospace applications. Met-L-Chek® R-504 is ideal for penetrant test panel storage and cleaning star burst cracks on TAM panels. Download TDS.

Met-L-Chek® VP-30 – Aerosol Water Washable Inspection Penetrant

Met-L-Chek® VP-30 is a visible (Type 2), water washable (Method A) and solvent removable (Method C) inspection penetrant. It is designed for use in general metalworking, welding, nuclear and automotive applications for surface flaw and through leak detection. Download TDS.

Met-L-Chek® Vp-31A – Aerosol Post Emulsifiable Inspection Penetrant

Met-L-Chek® VP-31A is a visible aerosol post emulsifiable inspection penetrant designed to detect surface flaws and leaks. It is a visible (Type 2), post emulsifiable (Method B) and solvent removable (Method C) inspection penetrant. It is designed for use in general metalworking, welding, nuclear and automotive applications. Download TDS.

WCP-81 is a specially formulated, fast drying white contrast paint. It is used to create a consistent background on the component surface to increase contrast for fine flaw detection with the black visible particles in MPI-80P. When dry, this white contrast paint is resistant to the wet method baths used for inspection. It is easily removed from the demagnetized component surface with a solvent cleaner such as R-504. Download TDS.

Need more information?

icon quote

Request a Quote

At ACS we are ready to meet your needs. Please fill out the form and we will attend you shortly

icon ContactUs

Contact Us

For any general or technical questions, ACS is here to help. Please fill out the form below and we will contact you